Floor 15 AMP 3200
AF 115 - 1,4
Stage-monitor Self Powered speaker, DSP, 1600W cont. X2
Technical specifications
Technical specifications
Techical Data
Frequency Response: (+/-3dB)
Full Range: 40Hz to 20KHz
Frequency Range with Xover: 40Hz to 1.2KHz / 1.2KHz to 20KHz
Transducers:
LF Section: (15”) Impedance 8ohms (RCF)
Sensitivity (1W, 1m) – 101dB/ 40Hz – 3KHz
HF Section: (2,5”/ 1,4”) Impedance 8ohms (RCF)
Sensitivity (1W, 1m) – 110dB/ 700Hz – 20KHz
Power Handling (AES/ PROG. POWER/ PEAK): 540W / 1080W / 2160W
LF 450W / 900W / 1800W
HF 90W / 180W / 360W
Maximum SPL: 129dB Cont / 138.9dB Peak - Peak
Directivity: Nominal coverage 60 degrees conical
Connection:
Input: 2x Neutrik XLR combo female (two analog input)
Output: 1x Neutrik Speakon NL4 (Powered output +1 -1 full range)
Power Supply: 2x Neutrik powercon (In /out) (230V ac)Physical Data
Dimensions and weight:
Height (mm) 380 mm
Width (mm) 480 mm
Depth (mm) 615 mm
Weight (kg) 20.500 kg
Constrution:
Material: Birch wood 15mm
Paint: Polyurea (optional Watertex)
Shape: Trapezoid
Grille: 2mm steel Hexagonal perforated
Amplifier and DSP: Power Soft DigiMod 3004PFC2 and DSP-LITE
Feeds 4 preset:
Preset 1: 2 Monitors Stereo Full Range (Left XLR input signal for itself, Right XLR input signal to NL4 8-ohm amplified)
Preset 2: 2 Monitors Stereo Low cut 60Hz (Left XLR input signal for itself, Right XLR input signal to NL4 8-ohm amplified)
Preset 3: Monitor + Sub Mono Full Range (XLR signal to itself and to NL4 of sub output)
Preset 4: Monitor + Sub Mono High cut -2dB (XLR signal to itself and to NL4 of sub output)
Preset 3: Monitor + Sub Mono Full Range (XLR signal to itself and to NL4 of sub output)
Preset 4: Monitor + Sub Mono High cut -2dB (XLR signal to itself and to NL4 of sub output)
Single channel mode: 4 Ω - 1600 W / 8 Ω - 1100 W / 16 Ω - 600 W
Bridge mode: 8 Ω - 3200W / 16 Ω - 1600 W
Audio frequency response: 10 Hz - 25 kHz ( -3 dB) for 1 W @ 4 Ω
EQ In: Parametric, hi/lo shelving, band pass, band stop, all pass
EQ Out: Parametric IIR: peaking, hi/lo shelving, all pass, band pass, band stop, hi/lo pass
Crossover: Butterworth, linkwitz-Riley, Bessel or arbitrary asimmetric: 6 dB/oct to 48 dB/oct (IIR), linear phase (FIR), hybrid (FIR-IIR)
Limiters: Peak limiter, RMS limiter, frequency RMS limiter
Audio frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
EQ In: Parametric, hi/lo shelving, band pass, band stop, all pass
EQ Out: Parametric IIR: peaking, hi/lo shelving, all pass, band pass, band stop, hi/lo pass
Crossover: Butterworth, linkwitz-Riley, Bessel or arbitrary asimmetric: 6 dB/oct to 48 dB/oct (IIR), linear phase (FIR), hybrid (FIR-IIR)
Limiters: Peak limiter, RMS limiter, frequency RMS limiter
Audio frequency response: 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
Amplifier module:
Power Out:
DSP: 2in/ 2Out